unisonic technologies co., ltd mpsa92m pnp epitaxial silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r201-020.ba high voltage transistor ? features * collector-emitter voltage: v ceo =-300v * collector dissipation: p c(max) =625mw * low collector-emitter saturation voltage to-92 1 ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing mpsa92ml-t92-b mpsa92mg-t92-b to-92 e b c tape box MPSA92ML-T92-K mpsa92mg-t92-k to-92 e b c bulk mpsa92ml-t92-r mpsa92mg-t92-r to-92 e b c tape reel note: pin assignment: e:emitter b:base c:collector mpsa92ml-t92-b (1)packing type (2)package type (1) b: tape box, k: bulk, r: tape reel (2) t92: to-92 (3) halogen free, l: lead free (3)lead free
mpsa92m pnp epitaxial si licon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r201-020.ba ? absolute maximum ratings (t j =25c, unless otherwise specified) parameter symbol ratings unit collector-base voltage v cbo -300 v collector-emitter voltage v ceo -300 v emitter-base voltage v ebo -6 v collector dissipation (t a =25c) p c 625 mw collector current i c -800 ma junction temperature t j 150 c storage temperature t stg -55~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t j =25c, unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =-100 a, i e =0 -300 v collector-emitter breakdown voltage bv ceo i c =-1ma, i b =0 -300 v collector-emitter breakdown voltage bv ces i c =-100 a, v be =0 -300 v emitter-base breakdown voltage bv ebo i e =-100 a, i c =0 -5 v collector cut-off current i cbo v cb =-300v, i e =0 -100 na collector cut-off current i ces v cb =-300v, v be =0 -1 a emitter cut-off current i ebo v eb =-4v, i c =0 100 na v ce =-10v, i c =-1ma 60 v ce =-10v, i c =-10ma 80 300 v ce =-10v, i c =-100ma 80 dc current gain (note 1) h fe v ce =-10v, i c =-200ma 40 i c =-30ma, i b =-1ma -0.20 collector-emitter satu ration voltage v ce(sat) i c =-100ma, i b =-10ma -0.7 v base-emitter satura tion voltage v be(sat) i c =-10ma, i b =-1ma -0.75 v output capacitance c ob v cb =-20v, i e =0, f=1mhz 8 pf note: 1. pulse test: pw<300 s, duty cycle<2% utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
